Made from SBR rubber granulate, these rubber play tiles are the perfect addition to any children’s play area.
Intended for use in playgrounds and even gardens, these tiles fit together easily using interlocking pegs and can be used to create a stable, low maintenance, non-slip environment which maintains natural drainage routes. This means that the tiles allow air, water and essential nutrients through to the ground below.
These interlocking tiles have been tested to BS EN 1177 standards and have a critical fall height of one metre so suit all manner of low level child’s play.
They’re available in three colours – red, green and black – so you can create a vibrant, imagination stimulating environment, or maintain a natural appearance while increasing safety.
These rubber tiles are supplied with interlocking pins and are easy to lay on level ground. If you’d like any advice on installation, take a look at our detailed installation guides. If you’re unsure on the best product for you, don’t hesitate to get in touch and we’ll be more than happy to help you out.
Due to the typical manufacturing tolerances and the expansion and contraction of rubber under temperature fluctuations, we cannot guarantee that all holes will be aligned and some tiles may require additional bonding or drilling to create perfect alignment. These tiles are supplied with 8 pins per tile to assist with installation but are not sold as interlocking, therefore any tiles with alignment issues will not be deemed to be faulty.
To see how our play tiles have been used in the past read our blog; Rubber Play Tiles Used To Create A Golf All Weather Tee!