Ground reinforcement mats are manufactured in the UK from 100 % recycled polyolefin and has been engineered as a lightweight durable, weatherproof permeable paving solution. Colour options available:
- Type (S) Grey / Black
- Type (T) Green
Our ground reinforcement mats MatsGrids™ MG40 are able to support 320 loadbearing capacity per m2, with a compression strength of up to 10 tonnes axle load in accordance with Din 1072.
MatsGrids™ MG40 are fully compliant with new planning requirements surrounding driveways to the frount of properties and comply with the Flood and Water Management Act 2010, encouraging the use of permeable surfaces to mitigate against flooding.
MatsGrids™ MG40 can be either gravel or grass infilled and are a durable and eco-friendly alternative surface for permanent and overspill car parks, private driveways, emergency vehicle access lanes, golf buggy paths, helicopter pads, cycle routes, pathways, verge stabilisation and many other uses.
MatsGrids™ MG40 panels are 330x330x40mm and weights 0.54kgs. 9 panels equals 1 square meter (approx) and will weight 4.86kgs. Installation is very quick and simple and will take 1 person approximately 1 hour to lay 100 square meters.
MatsGrids™MG40 are 100% recycled and offer environemental compatability which is harmless, groundwater nuetral, weatherproof and UV resistant. PaveMats are resistantant against acid and leaching, alcohol, oil and petrol.
Typical installation guide for MG40(S) If you require any further guidance, please contact MatsGrids.