40T Soakaway Crate – 400L Attenuation Crate

£55.00

  • Size: 1000mm x 1000mm x 400mm
  • Capacity: 400 Litres / 2.5 Per Cubic Metre
  • Weight per crate: 16 kgs
  • Void Ratio 95.5%
  • Load bearing: 40 tonnes
Product unavailable. Expected back in stock soon.

Out of stock

Email when stock available



SKU: SC40T-10040 Category:

Description

40 Tonne Stormwater StormCrate

Our water storage crates are modular lightweight cells with high void ratio that can be used to create underground water storage and attenuation systems for car parks, landscaped areas as well as heavier duty use areas within residential, industrial, commercial or retail areas. Water storage crates are used to create a permeable infiltration scheme and effectively manage excessive rainwater.

Advantages of using water storage/attenuation systems:

  • Prevents extreme peak flows to main drainage and water purification systems
  • Grey water storage for use in flushing of toilets, watering of plants and cleaning of vehicles etc.
  • Allows development of difficult sites by using attenuation / water storage
  • Decreases environmental problems caused by development
  • Decreases the possibility of flooding during heavy rain falls
  • Rainwater is cleaned by the geotextile surround

Soakaway Crate Installation Instructions (Excerpt from Downloadable Install Guide):

  1. Excavate the designated area to your required length, width and depth (this depends on the number of soakaway crates you decide to use) and level the base of the ‘hole’.
  2. Lay a layer of sharp sand to the base of the excavation and level this off as well as you can.
  3. Install your soakaway crates into the excavation and if using more than one, connect them together using clips or cable ties.
  4. If necessary, connect pipes into the crates.
  5. Backfill the area with the soil you removed during the excavation.

Additional information

Weight 130 kg

Installation Guide

How can Soakaway Crates be used?

Answer:

Soakaway crates can be used under a range of applications as either attenuation systems for drainage or water storage systems for water reuse.


Do I need to use membrane with Soakaway crates?

Answer:

Yes, a Woven Membrane or Non-Woven Membrane is required when installing soakaway crates. Learn which one you require by reading our installation guide.


Where can I find installation instructions?

Answer:

Install guides can be found on the ‘downloads’ tab. In addition, more information on installations can be found through our blogs and YouTube videos.


Ask a QuestionClick here to show the question form